General
DESCRIPTION
• Complete installation of flooring system including interlocking
suspended flooring modular tile and the application of game
lines and transition materials.
• Related work specified under other sections.
– Installation of concrete subfloors
– Thresholds and transitions
– Game lines and equipment
QUALITY ASSURANCE
• Manufacturer of synthetic flooring shall be an organization
specializing in the manufacturing of the products specified in
this section.
• Manufacturer shall be ISO 9001:2015 Certified to assure
proper quality control.
• Products specified in this section shall be installed and/or
supervised by an authorized factory trained representative.
• Installer shall be liable for all matters related to the installation
of the products described herein for a period of not less than
one year from the date of installation.
SUBMITTALS
• Specification sheets for products proposed for submission.
• Submit a sample of specified flooring system showing color
and edging system.
• Maintenance program and specifications shall be submitted
upon completion of installation.
DELIVERY AND STORAGE
• General contractor shall provide a clean and dry area where
the materials can be stored until time of installation.
• Material shall not be delivered on site until all related work is
completed and proper storage facilities can be secured.
WORKING CONDITIONS
• Synthetic materials shall not be installed until all other trades
are completely finished in the synthetic flooring areas.
WARRANTY
• SnapSports® warrants that the materials supplied shall be
free from manufacturing defects as outlined in the limited
warranty.
• This warranty is expressly limited to the synthetic flooring
materials supplied by SnapSports. This warranty does
not cover damage caused by fire, winds, floods, moisture,
chemicals (other than those used for maintenance specified
by manufacturer) nor does it apply to damage caused
by ordinary wear, misuse, abuse, neglect, faulty building
construction faulty subsurface or site preparation, or
unprofessional installation.
Products
MATERIALS
• SnapSports Outdoor Revolution® suspended modular
surfacing
– Slip-resistant open top design shall be 12″ x 12″ x 5/8″ (304.8 mm x 304.8 mm
x 15.9 mm), high impact PP (polypropylene) suspended floor tile with 1128
individual support legs. Weight: 12.7 oz. (360 g)
• Game Line Striping
– Primer shall be of proprietary formulation as supplied by SnapSports, Inc.,
Salt Lake City, Utah, U.S.A.
– Paint shall be a two-component polyurethane as recommended by
SnapSports, Inc.
PRODUCT TEST RESULTS
• Flame Spread Index (ASTM E 648): 0.13 W/cm2
• Friction (ASTM C 1028): Dry – 0.65, Wet – 0.64
• Compression vs. Crush (ASTM D 3998): No Break
• Noise Reduction Coefficient (ASTM C 423): 5 – 10%
• Rolling Load (DIN 18032-02): Pass
• Standard Deformation (DIN 18032-02): 0.9 mm
• Ball Rebound (DIN 18032-02): 98%
• Load Bearing Capacity (DIN 18032-02): >180 psi
• R-Value: x<1
• Flatness: 0.0mm
• Lateral Movement: 0.00″ – 0.045″
SANITARY INFORMATION
• Fungus Resistance (ASTM G 21): No Growth
• Resistant to the following:
– Bacteria and Mildew
– Staphylococcus
– Klebseilla Pnuemoniae
– Pink Staining Organism
– STV Reticulum
Execution
INSPECTION
• Inspect concrete slab for proper tolerances, dryness and
level. Any discrepancies must be reported in writing to the
general contractor.
• Concrete slab to be broom cleaned prior to installation of
synthetic flooring.
• Installer shall document all working conditions prior to the
commencement of the installation.
INSTALLATION
• Prep concrete to accommodate the synthetic flooring
products.
• Install synthetic flooring products to a pre-approved layout.
• Trim modular tiles to within ¾” to any wall or obstruction to
prevent any potential buckling issues.
• Game Line application
– Use only 3M 401+ tape for masking game lines or any other tape that is
approved by flooring supplier.
– Lines shall be primed and painted using SnapSports primer and
recommended two part polyurethane paint as indicated on layout drawings.
• Ramp Edging (optional) should be attached to edge of court
where applicable.
• Remove all excess waste and materials from area of work.
Dispose of empty containers in accordance with federal and
local statutes.
• Keep all trades off of flooring area for a period of 72 hours to
allow for proper paint cure.
Working in collaboration with players of all levels, we’ve developed a new material formulation specifically for Pickleball courts. This patent pending polymer provides increased grip for the Pickleball and more traction for the players. The high-grip surface gives better ball bounce, more consistency, and better traction in damp conditions.
From backyard courts to large community operations, PickleGrip Pickleball surface is up for the game. Utilizing a flexible spine and patented ShockLock® locking system, Harshis Court is the best performing modular Pickleball surface available, period.
Key Benefits
• Fast, true pickleball bounce – similar to a hardwood court
• Easily installed directly on an existing slab or cracked tennis court with minor
prep work
• Highest wet/dry traction of any modular surface available
• 14% More force reduction than hardcourts
– More comfortable for athletes
– Force reduction helps keep injuries low and comfort high
• Post tension slab not required
• 16-year warranty and proudly manufactured in Utah, USA
• Patented ShockLock® system for unmatched strength, comfort and lateral
stability
• 1186 individual support legs for consistent ball bounce
